Master of Science in Building Services Engineering

Permanent URI for this collectionhttp://192.248.9.226/handle/123/12432

Browse

Browsing Master of Science in Building Services Engineering by Subject "BIO-GEO COMPOSITE"

Filter results by typing the first few letters
Now showing 1 - 1 of 1
  • Thumbnail Image
    item: Thesis-Abstract
    Laboratory wastewater treatment using clay biochar composites in bio-geo filters
    (2021) Pathinayaka, V; Bandunee, A; Manthilake, MMI
    Laboratory waste is overlooked because of its low flow rate, despite the fact that it has a negative influence on the human and environmental systems. As a result, the focus of this research is on using clay biochar composites in horizontal flow bio geo filters to treat university laboratory wastewater in an environmentally acceptable manner. The composite was made with a 1:5, 1:3, 1:1, 3:1, and 5:1 mass ratio of Cinnamon biochar and Neem biomass to clay from Giant tank, Murunkan, Mannar for laboratory research experiments, and then treated with slow pyrolysis at 400°C. To determine the hydraulic retention period, adsorption kinetic studies and isotherms were performed, followed by the m/v ratio and COD test. For both Neem and Cinnamon, the Clay: Biochar mass ratios, 1:1 ratio composite exhibits superior efficacy in COD elimination. To ensure the presence of Montmonolite, clay samples were analyzed by Laser diffraction particle size analysis. As a result, clay samples taken from the Giant tank contain 3.42% and 4.99% nano clay, respectively. The existence of MMT in Murunkan clay is confirmed by FTIR readings of clay samples from Murunkan, which reveal a distinct and strong band at 998.03 cm-1 and 3620 cm-1. XRF analysis was used to assess the chemical composition of biochar samples. The use of biochar with a greater K content supports heavy metal sorption and phosphors retention. H/C ratios of Cinnamon and Neem biochars were 0.06 and 0.02 respectively, according to CHN analyses. BET study revealed that the specific surface area (SSA) of gasified Cinnamon Biochar was 563m2/g. As a result, it has a higher adsorption affinity. Kinetic model parameters for COD adsorption onto Neem - BC and Cinnamon - BC composites were determined using the most commonly utilized adsorption kinetic mathematical models. The removal effectiveness of adsorbent constructed of Neem biochar composite is better than that of Cinnamon biochar composite. The Bio Geo Filter was created using Subsurface Flow Constructed Wetlands design principles. For the treatment system, a composite sample of on-site stored wastewater was diluted to 1:100. The system is based on a mix of physical, chemical, and biological processes that occur naturally in wetlands and are linked to vegetation, sediments, and the microbial populations that live there. The removal effectiveness of the system for heavy metals (Cd, Cr, Hg, and Mn) was investigated, and all heavy metal concentrations in effluent were much lower than in influent. The effluent quality was assessed and compared to CEA criteria for inland surface discharge. When water travels through the systems and into the tanks, only phosphate levels increase. As a result, methods for using this by-product (Phosphate) as fertilizer must be developed. As a result, our newly designed cost-effective bio-geo filter treatment system is highly recommended for laboratory wastewater purification. Keywords: Laboratory wastewater, Murunkan Clay, Biochar, Constructed wetland, Bio-geo composite, Kinetic models & Isotherms