Browsing by Author "Liu, H"

Now showing 1 - 4 of 4

item: Conference-Abstract
Development of a numerical simulation method for complex fracture process of rocks based on 3-D ECZM-FDEM using GPGPU parallel computation
(Division of Sustainable Resources Engineering, Hokkaido University, Japan, 2024) Takarada, K; Fukuda, D; Di, W; Liu, H; Ogata, S; Maeda, Y; Min, G; Kawasaki, S; Iresha, H; Elakneswaran, Y; Dassanayake, A; Jayawardena, C
For the developments of surface and underground mines, numerical simulation has been regarded as a highly crucial approach in terms of mining design and safety. The combined finite-discrete element method (FDEM)[1] has attracted significant attention for reasonably simulating very complex fracture processes of rocks. FDEM is based on the continuum mechanics model considering finite-strain theory, the cohesive zone model (CZM)[2] by utilizing initially zero-thickness cohesive elements (CEs) and potential-based contact mechanics model. The FDEM based on the intrinsic CZM (ICZM), which inserts the CEs at the onset of the simulation, has been the mainstream of previous studies applying FDEM due to its simpler implementation. Although the FDEM is generally known as a computationally expensive numerical method for both two-dimensional (2D) and three-dimensional (3D) problems, the computational acceleration of the ICZM-based FDEM can be achieved with relative ease through parallel computation using general-purpose graphics processing units (GPGPUs). However, the accuracy of continuous deformation when rock is intact is significantly compromised in the ICZM. The FDEM based on the extrinsic CZM (ECZM), which activates CEs only when and where the local stress reaches the given activation criteria, is expected to overcome this issue. However, although the implementation of 2-D ECZM-based FDEM with the GPGPU parallel computation has been reported, its 3-D counterpart has not been achieved. Based on this background, this study proposes a novel master-slave algorithm to achieve the implementation of the GPGPU-parallelized 3-D ECZM-based FDEM. Figure 1 shows the examples results of GPGPU-parallelized 3-D ECZM-based FDEM for uniaxial compression test simulation and spalling test simulation [3]. These results indicate that the developed ECZM-FDEM can reasonably reproduce the fracture and failure patterns of rocks in both static and dynamic tests compared to laboratory tests. The significant advantage of the proposed approach lies in the fact that the precision of continuous deformation can compared to those of the parallelized ICZM-based FDEM. The proposed approach could be an important basis for the further developments of the ECZM-based 3-D FDEM for simulating very complex 3-D rock fracturing processes in the various rock engineering problems.
item: Conference-Full-text
Experimental and numerical analysis of dynamic fracture processes in rock and rock-like materials using NRC vapor pressure agent
(Division of Sustainable Resources Engineering, Hokkaido University, Japan, 2024) Min, G; Fukuda, D; Di, W.; Liu, H; Kawasaki, S; Cho, S; Iresha, H; Elakneswaran, Y; Dassanayake, A; Jayawardena, C
This study investigates the fracture characteristics of rocks and rock-like materials subjected to the Nonex Rock Cracker (NRC), a vapor pressure crushing agent. The NRC generates vapor pressure by instantaneously vaporizing a crystallized water mixture through the thermite reaction. Both experimental methods, using high-speed cameras and dynamic pressure gauges on Polymethyl methacrylate (PMMA) and granite blocks, and numerical simulations with a 3-D combined finite-discrete element method (FDEM) were utilized. Results indicate that gas pressure infiltrating pre-existing cracks primarily drives crack propagation. The study concludes that accurately modeling gas injection into initiated cracks during deflagration is essential for reasonable numerical simulations of rock fracturing processes using NRC.
item: Conference-Full-text
A rectangular pulse current generator for calibration of magnetic field sensor
(Institute of Electrical and Electronics Engineers, Inc., 2021-09) Ouyang, H; Liu, H; Jin, X; Abeykoon, AMHS; Velmanickam, L
In order to study the calibration of magnetic field sensor, a compact rectangular pulse current generator(RPCG) is developed. Based on the LC network, the influence of loop parameters on rectangular pulse current waveform is studied using the software Multisim. The relationship between peak current, peak duration time and circuit parameters such as charging voltage, the number of links, inductor and its internal resistance, capacitor and load resistor are summarized. At the same time, a rectangular pulse current generator is designed to meet the project’s requirements. The maximum output current is 10 kA, and the peak duration time is 2 ms. The actual test results show that the waveform is in good agreement with the simulation analysis. The method can provide a reference and theoretical basis for a rectangular wave generator (including a voltage generator).
item: Article-Full-text
Thermodynamic Barrier for Nanoparticle Penetration into Nanotubes
(American Chemical Society, 2020) Long, T; Wu, H; Yu, H; Thushara, D; Bao, B; Zhao, S; Liu, H
It is promising yet challenging to develop efficient methods to separate nanoparticles (NPs) with nanochannel devices. Herein, in order to guide and develop the separation method, the thermodynamic mechanism of NP penetration into solvent-filled nanotubes is investigated by using classical density functional theory. The potential of mean force (PMF) is calculated to evaluate the thermodynamic energy barrier for NP penetration into nanotubes. The accuracy of the theory is validated by comparing it with parallel molecular dynamics simulation. By examining the effects of nanotube size, solvent density, and substrate wettability on the PMF, we find that a large tube, a low bulk solvent density, and a solvophilic substrate can boost the NP penetration into nanotubes. In addition, it is found that an hourglass-shaped entrance can effectively improve the NP penetration efficiency compared with a square-shaped entrance. Furthermore, the minimum separation density of NPs in solution is identified, below which the NP penetration into nanotubes requires an additional driving force. Our findings provide fundamental insights into the thermodynamic barrier for NP penetration into nanotubes, which may provide theoretical guidance for separating two components using microfluidics.