Browsing by Author "Gunasekara, JMP"

Now showing 1 - 3 of 3

item: Conference-Abstract
Control methodologies for upper limb exoskeleton robots
(2016-09-22) Gunasekara, JMP; Gopura, RARC; Jayawardane, TSS; Lalitharathne, SWHMTD
An exoskeleton robot is kind of a man-machine system which mostly uses combination of human intelligence and machine power. These robotic systems are used for different applications such as rehabilitation, human power amplification, motion assistance, virtual reality etc. Successful operation of an exoskeleton robot depends on correct selection of design and control methodologies. This paper reviews control methodologies used in upper limb exoskeleton robots. In the review, the control methods used in the exoskeleton robots are classified into three categories: control system based on human biological signal, non-biological signal and platform independent control system. Different types of control methods under each category are compared and reviewed.
item: Conference-Full-text
Design of a weft gripper system for required weft tension on rapier loom
(2006) Gopura, RARC; Gunasekara, JMP; Fernando, EASK
In an existing rapier loom, when the rapier comes out from the shed, the tension of the weft yam changes before the reed reaches the fabric fell. Also in case of elastic yam, a certain length of the yam may retract due to the elastic nature of the yam. With the existing systems of rapier looms, weft yam tension cannot be controlled until the weft is interlaced into the fabric. Because of the above reasons the quality, selvage and appearance of the fabric could be impaired.
item: Thesis-Abstract
Development of an upper-limb power-assist exoskeleton robot to generate human like motion
(2015-08-28) Gunasekara, JMP; Gopura, RARC; Jayawardena, TSS
Weakness is inherently associated with ageing society. In fact, Exoskeleton robotic technology can be used to provide assistance for age society to perform activities of daily living (ADL) without depending on others. Upper limb exoskeleton robots are much suitable to perform ADL. Typically, upper limb exoskeleton robot consists of number of joints and links which are corresponding to joints and limbs of human upper limb. Further, exoskeleton robots differ from other conventional robots due to present of close interaction with wearer. In general, two types of interaction can be seen in exoskeleton robots: physical human robot interaction (pHRI) and cognitive human robot interaction (cHRI).Strengthening features of cHRI can be seen on recent developments of upper limb exoskeleton robots. However, there exists a vacuum to identify aspects of pHRI relating to performance of exoskeleton robots. The research work of this thesis is focused to design an upper limb exoskeleton robot for motion assist taking effect of kinematic redundancy. The proposed exoskeleton robot (6- REXOS) has four active degree of freedom (DOF) and two passive DOF in its kinematic chain. Two passive DOF are provided to 6-REXOS by means of flexible bellow coupling and those are positioned at wrist and elbow joint of the 6-REXOS to keep their axes parallel to each other. This configuration enhances kinematic redundancy in 6-REXOS. The effect of redundancy is verified with respect to dexterity measures, such as manipulability index, minimum singular value, and condition number. Further, manipulation of end-effector of 6- REXOS due to kinematic redundancy in operational space is presented base on manipulability ellipsoids. 4DOF kinematic model for human lower arm is proposed in thesis. Manipulability measure of human kinematic model is used to benchmark the performance of 6-REXOS. Different measures are taken into account in design of 6-REXOS to ensure smooth pHRI. Passive compliance of bellow coupling in order to reduce kinematic discrepancy as well as improve the manipulation of 6-REXOS is highlighted in this thesis.